Technical Data
- Cable type: self-regulating heating cable
- Working voltage: 200~240 V AC
- Rated power: 20 W/m (at 10 °C)
- Max maintain temperature: 65 °C
- Max enduring temperature: 135 °C
- Width x Thickness: 8.1 mm x 3 mm
- Min bend radius: 15 mm
- Conductor: Tinned copper wire
- Jacket: PE
- Max circuit length: 30 m
Structure
- Copper conductor
- Conductive heating element
- Inside extra insulation
- PE outer sheath
Working Principle
This cable is suitable for household drinking water pipe and drain pipe freeze protection in winter and other heating applications. The cable can self-regulate the output power according to the temperature, meaning it will not overheat and a temperature controller is not necessary. It features a high-quality PE jacket and an inner PE composite insulation layer for superior waterproof performance.
Installation Steps
- Seal the end of the cable with a heat shrinkable tube or electrical insulating tape. DO NOT connect the two conductors together.
- Connect the other end with a cold wire or plug for connecting to the power supply.
- Wrap the heating cable on water pipes or fasten it straight along the pipes. Fasten the cable every 30~60 cm with thermal tape or aluminum tape.
- It is suggested to wrap a layer of rubber insulation on the pipe to enhance the efficiency of the heating cable, save energy, and protect the cable.
- Plug into 220~240 V to finish the heat trace system installation.
No reviews yet
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent