Self-Regulating Heating Cables

Self-regulating trace-heating cables whose heat output reduces as their temperature rises.

Compare voltage, output per metre, cable length and temperature rating to choose a suitable product for the application.

Self-Regulating Heating Cables | AnyHeater
Filter by
Price
$ $
Length
more... less
Voltage
Width
Maximum Circuit Length
Maximum Operating Temperature
Power
based on review(s)
No reviews yet
Self-Limiting Pipe Heating Cable for Freeze Protection and Roof De-Icing Ref: AH100959

Self-regulating heating cable designed for commercial and residential pipe freeze protection and roof and gutter de-icing applications.

17 W/m Self-Regulating Heating Cable Pipe Freeze Protection, Roof & Gutter De-icing
$3.96
based on review(s)
No reviews yet
Self-Regulating Pipe Freeze Protection and Roof De-Icing Heating Cable Ref: AH100989

Self-regulating heating cable for pipe freeze protection and roof de-icing, operating at 110V or 220V with a 17 W/m power output.

110 V / 220 V 17 W/m Pipe Anti-Freeze Protection and Roof & Gutter De-icing
$369.52
Showing 1-12 of 25 item(s)
Selection help

Frequently asked questions

Practical guidance for choosing and using products in this category.

What is the difference between self-regulating cable and resistance heating wire?

Self-regulating cable changes its heat output in response to its local temperature. Resistance heating wire has an electrical resistance that must be matched to the intended length, supply and heating design. Their sizing and connection requirements are different.

Choose by the exact product type and application, not by appearance. Follow the model's instructions for cutting, termination, insulation and temperature control.

Can I cut heating cable or heating wire to a shorter length?

It depends on the construction. Some self-regulating cables are designed to be cut to length within specified circuit limits and require approved end seals. Preassembled kits, fixed-length heating cables and resistance wires may have different restrictions.

Shortening a resistance wire changes its electrical characteristics and can make the original supply unsuitable. Do not cut or splice a heating section unless the instructions for that exact product permit it and the revised design has been checked.

How do I choose a power supply for low-voltage heating cable?

Match the cable's rated voltage and AC/DC requirements. Size the supply, wiring and protection for the full installed length and the manufacturer's current requirements, including cold-start current for self-regulating cable.

Running wattage alone may underestimate the required supply capacity. For longer runs, account for voltage drop and maximum circuit length. If the product information does not specify startup requirements, confirm them before choosing a supply.

Does self-regulating heating cable maintain an exact temperature?

No. Self-regulating cable adjusts its heat output locally, but the resulting pipe or surface temperature depends on the cable model, ambient conditions, insulation and heat loss. Its temperature rating is not a guaranteed thermostat setting.

Use the specified controls where temperature limits or an accurate setpoint are required. For freeze protection, select the cable and insulation for the pipe and the lowest expected ambient temperature.

Loading...
Back to top