Threaded Immersion Heaters

Threaded immersion heaters install through a threaded opening in a tank or vessel and heat compatible liquids directly. They provide a secure, serviceable connection for water heating, brewing, process tanks and industrial liquid-heating systems.

Match the thread standard and diameter, voltage, power, element length and sheath material to the application. Confirm suitable sealing and ensure the active heating area remains immersed while powered.

Threaded Immersion Heaters
Filter by
Price
$ $
Voltage
more... less
Power
more... less
Tube Length
more... less
Thread Size
more... less
Tube Material
Custom made

Need an exact replacement?

Send dimensions, voltage, power, material, and photos. We’ll manufacture a heating element for your application.

Fill out the form
based on review(s)
No reviews yet
DN40 1.5-Inch Threaded 304 Stainless Steel Immersion Water Heater Element Ref: AH100004

Industrial 304 stainless steel threaded immersion water heater element available in multiple power ratings, voltages, and tube lengths.

220 V / 380 V 3 kW / 4.5 kW / 6 kW / 9 kW / 12 kW 195 mm, 230 mm, 250 mm, 295 mm, 355 mm (Across offered models)
$162.42
based on review(s)
No reviews yet
DN40 1.5" BSP Water Heating Element with Ground Screw and Sensor Probe Ref: AH100005

DN40 1.5-inch threaded immersion water heating element with built-in sensor probe and grounding screw, available in multiple power ratings and...

220 V / 380 V 3 kW / 4.5 kW / 6 kW / 9 kW / 12 kW 195mm/230mm/250mm/295mm/355mm Across offered models
$147.05
based on review(s)
No reviews yet
DN25 1 Inch BSP Thread Water Boiler Steam Immersion Heating Element 304SUS 240V Ref: AH100014

DN25 1" BSP thread immersion heating element made of 304 stainless steel, operating at 240V with selectable power and length options.

240 V 1.5 kW / 2.5 kW / 3.6 kW / 4.5 kW Across offered models 180 mm / 200 mm / 265 mm / 320 mm Across offered models
$110.08
based on review(s)
No reviews yet
304 Stainless Steel Tubular Immersion Heating Element with 1-Inch NPT Thread Ref: AH100015

Durable 304 stainless steel tubular immersion heating element with a 1-inch NPT thread for liquid heating applications.

120 V / 220–240 V / 380 V (Across offered models) 1.65kW / 2.5kW / 3.5kW / 4.5kW / 5.5kW / 6.5kW (Across offered models) 180mm / 200mm / 250mm / 270mm / 290mm / 320mm / 350mm (Across offered models)
$68.87
Showing 1-11 of 92 item(s)
Selection help

Frequently asked questions

Practical guidance for choosing and using products in this category.

Can an immersion heater be switched on without liquid?

An element designed for immersion must not be energised with its heated section exposed to air. Keep the required heated length covered by the specified liquid throughout operation, following the product instructions. Dry operation can cause rapid overheating and element failure.

Temperature control and suitable low-liquid-level protection should be part of the system design. Keep electrical terminals dry and have the installation checked by a qualified installer.

Are BSP, NPT and metric heater threads interchangeable?

No. These are different thread systems, and a similar diameter or nominal size does not mean the fittings will seal or fit correctly. Check the specified thread family, size, pitch and sealing arrangement on both the heater and the equipment.

DN is a nominal size designation, not a measured outside diameter. For example, do not select a mounting hole or adaptor from a DN label alone. If the thread cannot be positively identified, provide the equipment specification and clear measurements before ordering.

Is every stainless steel heater suitable for drinking water, brewing or pool water?

No. Suitability depends on the complete product, including the sheath, seals, fittings, liquid chemistry and operating conditions. A stainless steel grade by itself is not proof of food-contact, potable-water or pool suitability.

Choose a model whose documentation explicitly supports your application. For salt water, chlorinated water, food or drinking-water contact, confirm compatibility before ordering rather than relying on the product name or appearance.

Loading...
Back to top