Tri-Clamp Immersion Water Tubular Electric Heater
Designed for brewing equipment, fermentation tanks, moonshine stills, and general engineering water tanks, this immersion heating element features a durable 304 stainless steel construction and a standard 2-inch Tri-Clamp flange.
Features
- 304 stainless steel heating tube and thread material
- Compatible with 2-inch Tri-Clamp (64 mm flange disc) connections
- Suitable for heating water in tanks, boilers, and brewing systems
Available Options
- Color: Gold, Grey, WHITE, Silver, Black
- Power / Tube Length: 3 kW (190 mm), 4.5 kW (210 mm), 6 kW (250 mm), 9 kW (290 mm), 12 kW (355 mm)
- Voltage: 220 V, 380 V
Specifications
| Property | Value |
|---|---|
| Tube Material | 304 stainless steel |
| Thread Material | 304 stainless steel |
| Flange Size | 2 inch Tri-Clamp |
| Flange Diameter | 64 mm |
| Thread Diameter | 52 mm |
| Tube Diameter | 8 mm |
| Voltage | 220 V / 380 V (Across offered models) |
| Power | 3 kW / 4.5 kW / 6 kW / 9 kW / 12 kW (Across offered models) |
| Tube Length | 190 mm / 210 mm / 250 mm / 290 mm / 355 mm (Across offered models) |
Application
Can be used as a heater for closed oil tanks, oil drums, hydraulic oil devices, water tanks, boiler heaters, tank heaters, and mold temperature machine heaters. Widely used in electronics, plastics, chemical industry, and environmental engineering equipment.
Safety Instructions and Warnings
- The heating area must be fully immersed in liquid at all times; dry heating will burn out the electric heating pipe.
- Clean grease on the surface of the heating pipe regularly to ensure service life.
- Ensure the terminal is effectively waterproof to avoid electrical leakage.
- The power design of each meter of the heating pipe must not exceed 2 kW.
- Do not use unstable containers; make sure the container is stable and securely fixed before installing the heater to prevent tipping, liquid dumping, dry burning, fire, or electric shock.
- Do not install the electric heating pipe at high-humidity air supply outlets, as dampness can decrease insulation and cause leakage or electric shock.
- Power allowance is -10% to +5%.
No reviews yet
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent