Cartridge Heaters

Single-Ended Cartridge Heater Tube Electric Immersion Heating Element

Reference: AH100353
Single-ended cartridge heater tube designed for industrial mold, extrusion, and machinery heating applications.

Choose configuration

Power
Tube Length
Voltage
Tube Diameter
Product overview

Overview

Single-ended electric heating pipes, also known as straight single-header heating pipes, are designed to be embedded in mold holes to provide direct thermal heating. They feature an internal heating wire and magnesia powder packed inside a stainless steel tube.

Specifications

PropertyValue
Material201 Stainless Steel
Voltage220V, 120V, 110V (variant dependent)
Tube Diameter8mm to 16mm (variant dependent)
Tube Length30mm to 180mm (variant dependent)
Power120W to 650W (variant dependent)
Wire Length300mm

Working Temperature Range

  • 201SS: 250-300°C
  • 304SS: 400-600°C
  • 310SS: 600-800°C

Available Options

  • 220V 350W 12.5x165mm
  • 220V 130W 12x100mm
  • 220V 420W 16x105mm
  • 120V 150W 9.5x76mm
  • 220V 260W 16x68mm
  • 220V 400W 16x100mm
  • 220V 260W 15x70mm
  • 220V 280W 15x75mm
  • 220V 260W 8x130mm
  • 220V 270W 8x135mm
  • 220V 250W 8x120mm
  • 220V 120W 16x30mm
  • 220V 440W 13x135mm
  • 220V 450W 13x140mm
  • 220V 160W 16x40mm
  • 220V 200W 16x50mm
  • 220V 540W 12x180mm
  • 110V 250W 9.5x150mm
  • 220V 240W 16x60mm
  • 220V 300W 15x80mm
  • 220V 330W 15x90mm
  • 220V 450W 15x120mm
  • 220V 500W 15x135mm
  • 220V 350W 15x100mm
  • 220V 400W 15x110mm
  • 220V 650W 13x200mm
  • 220V 350W 15x98mm

Applications

  • Abrasives heating
  • Core shooting machines
  • Packaging machinery
  • Flat vulcanizing machines
  • Stamping dies
  • Hot cutting knives
  • Injection molds and extrusion molds
  • Rubber molding molds
  • Meltblown molds
  • Hot press molding machinery
  • Semiconductor processing
  • Uniform heating platforms

Instructions for Use

  1. Before use, measure the power using a multimeter to confirm functionality before installation.
  2. Ensure correct wiring methods are used to avoid slow heating or damage.
  3. Note that cartridge heaters are not applicable to direct liquid and open air heating in standard spot configurations.
  4. Power Allowance is -10% to +5% (unheated).
  5. High pressure strength (unheated): 1500V.
  6. Insulation resistance (unheated): ≥1.5MΩ.
  7. Length error: ±1.5mm.
  8. Length of terminal without heating: 3-20mm.
  9. Length of bottom unheated zone: 3-9mm.
Custom made

Need a custom heating element?

Send us dimensions, voltage, power, material, and photos. We will manufacture a custom heating element for your application.

Fill out the form
Technical data

Specifications

Product Type Cartridge Heater
Wire Length 300 mm
Material 201 Stainless Steel
Loading...
Back to top