Product Overview
Designed for liquid heating applications such as breweries, distilling machines, water tanks, boilers, and reaction kettles, this DN40 tubular immersion heater is constructed from durable 304 stainless steel for both the tube and threaded connection. It features an integrated grounding screw for electrical safety.
Features
- Thickened SUS304 stainless steel tube construction
- High-temperature resistance heating wire and insulation powder
- Equipped with an integrated grounding screw
- Power tolerance rating: -10% to +5% (international standard)
Available Options
- Power & Tube Length: 3 kW (195 mm), 4.5 kW (230 mm), 6 kW (250 mm), 9 kW (295 mm), 12 kW (355 mm)
- Voltage: 220V, 380V
Specifications Table
| Property | Value |
|---|---|
| Thread Size | DN40 (1.5 inch BSP, 47 mm diameter) |
| Tube Diameter | 8 mm |
| Tube Material | 304 stainless steel |
| Thread Material | 304 stainless steel |
| Grounding | Yes |
Instructions for Use & Safety Warnings
- No Dry Burning: This heater is intended for water and oil immersion only. Never operate dry. When heating in oil, keep the temperature under 300 °C.
- Pre-Installation Check: Before installation, use a multimeter to measure the power and verify continuity.
- Manufacturing Notes: Industrial heating elements may exhibit minor normal marks such as weld lines, stainless steel traces, or polish traces. The internal OCr25Al15 heating wire is magnetic, making it normal for the element to be slightly adsorbed by a magnet.
Package Contents
- 1 x Tubular Heater
- 1 x Silicone Gasket
- 1 x Cap
- 1 x PG11 Connector
No reviews yet
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent