Product Overview
The DN40 threaded immersion water heater element is constructed with a thickened 304 stainless steel tube and thread, designed for heating water and oil in industrial and commercial applications such as boilers, large water tanks, reaction kettles, and heat-conducting oil stoves.
Features
- SUS304 thickened tube construction
- High-temperature resistance heating wire made of OCr25Al15 (magnetic property is normal)
- High-temperature insulation powder
Specifications
| Property | Value |
|---|---|
| Tube Diameter | 8 mm |
| Thread Size | DN40 (1.5 in) |
| Tube Material | 304 stainless steel |
| Thread Material | 304 stainless steel |
| Voltage Options | 220 V / 380 V |
| Power & Length Options | 3 kW (195 mm), 4.5 kW (230 mm), 6 kW (250 mm), 9 kW (295 mm), 12 kW (355 mm) |
Applications
- Heat-conducting oil stoves
- Large water tanks
- Boilers
- Reaction kettles
Instructions for Use & Safety Warnings
- Before installation, use a multimeter to measure the power and verify insulation.
- Power allowance is -10% to +5% under international standards; size tolerance is 0.5 mm.
- Strictly prohibit dry burning in water. When heating in oil, keep the operating temperature under 300 °C.
- Industrial manufacturing may exhibit minor welding, stainless steel, or polish traces, which are normal and do not affect performance.
Package Contents
1x Heater, 1x Silicone Gasket, 1x Cap, 1x PG11 Connector
No reviews yet
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent