Product Overview
Single-ended threaded cartridge immersion heater designed for liquid heating applications such as water tanks, boilers, and radiators. Built with a 304 stainless steel tube and a 1/2" (DN15, 21 mm) threaded mounting connection.
Features
- 304 stainless steel tube construction for corrosion resistance in water
- 1/2" threaded connection for secure installation
- Suitable for low-voltage power sources (12V and 24V)
Specifications
| Property | Value |
|---|---|
| Tube Diameter | 15.8 mm |
| Tube Length | 100 mm / 150 mm |
| Thread Size | DN15 1/2" (21 mm) |
| Voltage | 12V / 24V |
| Power | 50W - 300W |
| Tube Material | 304 Stainless Steel |
| Wire Length | 30 cm (11.8 inches) |
Instructions for Use
- Before installation, measure the power resistance with a multimeter to verify continuity.
- Ensure correct wiring configuration to prevent slow heating or damage.
- Do not run dry; the heating element must be fully immersed in water during operation.
No reviews yet
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent