MCH Ceramic Heating Plate
Metal Ceramics Heater (MCH) element formed by printing tungsten resistance paste on alumina ceramic casting blanks and co-sintering at high temperature. Features high efficiency, uniform temperature, rapid thermal compensation, and excellent insulation performance.
Features
- Multi-layer white alumina ceramic substrate (not less than 95% A-AL1203 content)
- High-temperature tungsten resistive heating tracks
- Nickel wire leads with PTFE high-temperature protective sleeving
- Rapid temperature rise and linear temperature-resistance relationship
Technical Specifications
| Property | Specification |
|---|---|
| Substrate Material | Alumina Ceramic (≥95% A-AL1203) |
| Resistive Material | Tungsten |
| Lead Wire | 0.5 mm Nickel Wire with PTFE Sleeve |
| Maximum Operating Temperature | 500 °C |
| Dielectric Withstand Voltage | 4500V / 1S (Leakage current < 0.5mA) |
Available Options
- 12x12x1.3mm 24V
- 12x12x1.3mm 40V
- 10x5x1.3mm 4.8V
- 10x7x1.3mm 24V
- 15x7x1.3mm 24V
- 10x7x1.3mm 12V
- 10x7x1.3mm 5V
- 15x10x1.3mm 5V
Usage Instructions & Safety Warnings
- Long-term operation must remain within the rated voltage and below 500 °C.
- Avoid rapid thermal shocks (hot and cold transitions) to prevent damage to the internal tungsten heating layer.
- Installation pressure must be kept below 2 kg/cm² using recommended elastic or stainless steel circlip mounting.
- Lead connections are not waterproof; avoid contact with liquids.
No reviews yet
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent