Self-regulating heating cable designed for household drinking water pipe and drain freeze protection in winter, as well as general heat tracing applications.
Working Principle
- The cable automatically adjusts its output power according to ambient temperature, preventing overheating and eliminating the need for a separate temperature controller.
- Constructed with a polyethylene (PE) outer jacket and PE composite inner insulation layer for enhanced waterproof performance.
Technical Specifications
| Feature | Specification |
|---|---|
| Cable Type | Self-regulating heating cable |
| Working Voltage | 200–240 V AC |
| Rated Power | 20 W/m (at 10 °C) |
| Max Maintain Temperature | 65 °C |
| Max Enduring Temperature | 135 °C |
| Dimensions (Width x Thickness) | 8.1 mm x 3 mm |
| Min Bend Radius | 15 mm |
| Conductor | Tinned copper wire |
| Jacket Material | PE |
| Max Circuit Length | 30 m |
Installation Steps
- Seal the end of the cable with a heat shrinkable tube or electrical insulating tape. Do not connect the two conductors together.
- Connect the opposite end to a cold wire or plug for power supply connection.
- Wrap the heating cable directly around water pipes or fasten it straight along the pipe runs, securing it every 30 to 60 cm with thermal or aluminum tape.
- Wrap a layer of rubber insulation over the pipe and cable to enhance heating efficiency, save energy, and protect the cable.
- Connect or plug into a 220–240 V power supply.
No reviews yet
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent