Product Overview
This electric underfloor heating mat is designed for simple floor warming within living areas where primary heating is not essential and there are alternative heating sources available, such as radiators. It can also serve as a primary heat source in certain circumstances when used with proper flooring insulation. Featuring a self-adhesive backing, this ultra-thin heating mat installs easily beneath concrete, wooden, old tile, or terrazzo floors.
Product Advantages
- Easy to install, suitable for a variety of ground decoration materials
- Installs directly into tile adhesive with almost no impact on floor elevation
- Can be laid directly onto the original ground without complex surface preparation
- Reaches expected ground temperature within 20 to 30 minutes after startup
Main Parameters
| Technical Property | Specification |
|---|---|
| Cable Construction | Twin conductor |
| Operating Voltage | 230 V |
| Power Output | 200 W/m2 |
| Cable Spacing | 100 mm |
| Cable Diameter | 3.6 mm ± 1 |
| Minimum Bending Radius | 25 mm |
| Conductor Insulation | Fluoropolymer/XLPE/Rubber |
| Outer Insulation | PVC |
| Maximum Heating Temperature | 60~80 °C |
| Minimum Installation Temperature | 5 °C |
| Length of Cold Lead | 2.25 m |
Available Options
- 50 cm x 1 m
- 50 cm x 2 m
- 50 cm x 3 m
- 50 cm x 4 m
- 50 cm x 5 m
- 50 cm x 6 m
- 50 cm x 7 m
- 50 cm x 8 m
- 50 cm x 9 m
- 50 cm x 10 m
- 50 cm x 12 m
- 50 cm x 14 m
- 50 cm x 16 m
- 50 cm x 18 m
- 50 cm x 20 m
- 50 cm x 24 m
- 50 cm x 30 m
No reviews yet
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent