Copper spiral water heating element for electric distillers and boilers. Available in 2.5kW, 3kW, and 4.5kW options.
Water Distiller Heaters
Water distiller heaters are replacement heating elements for distillation and water-purification equipment. They supply the heat needed to boil water inside a compatible distiller assembly.
Match the element shape, mounting thread, voltage, power, dimensions and terminal arrangement to the original component. Confirm physical and electrical compatibility before installation.
Recommended
Immersion water heating element with M16 thread and 304 stainless steel tube, designed for distillers and boilers.
Need an exact replacement?
Send dimensions, voltage, power, material, and photos. We’ll manufacture a heating element for your application.
Fill out the formSpiral electric heating element for water distillers and boilers, rated at 4.5KW with M16 threaded connection.
Replacement spring coil heating element for water distillers, buckets, and boilers, available in stainless steel or copper.
Frequently asked questions
Practical guidance for choosing and using products in this category.
Can an immersion heater be switched on without liquid?
An element designed for immersion must not be energised with its heated section exposed to air. Keep the required heated length covered by the specified liquid throughout operation, following the product instructions. Dry operation can cause rapid overheating and element failure.
Temperature control and suitable low-liquid-level protection should be part of the system design. Keep electrical terminals dry and have the installation checked by a qualified installer.
Is every stainless steel heater suitable for drinking water, brewing or pool water?
No. Suitability depends on the complete product, including the sheath, seals, fittings, liquid chemistry and operating conditions. A stainless steel grade by itself is not proof of food-contact, potable-water or pool suitability.
Choose a model whose documentation explicitly supports your application. For salt water, chlorinated water, food or drinking-water contact, confirm compatibility before ordering rather than relying on the product name or appearance.
Can an immersion heater run continuously?
Only when the selected model and the complete installation are rated for that duty. Continuous operation requires suitable heat removal, the specified liquid coverage, temperature control and protection against overheating or low liquid level.
Check the product duty rating and the tank or process requirements. A wattage rating alone does not confirm that a heater can run unattended or continuously in every installation.