Threaded cartridge heating element with a 6mm tube diameter and 201 stainless steel construction for industrial machinery.
Threaded Cartridge Heaters
Threaded cartridge heaters combine a cylindrical heating tube with an integrated threaded fitting for secure installation in equipment, moulds and process assemblies. The threaded connection simplifies positioning and removal while helping retain the heater in its mounting point.
Select the required thread size, tube diameter and length, voltage, power and sheath material. Confirm whether the chosen model is intended for solid, liquid or other specified heating applications.
Recommended
Threaded cartridge electric heating element with a 12mm tube diameter for water heating applications.
Need an exact replacement?
Send dimensions, voltage, power, material, and photos. We’ll manufacture a heating element for your application.
Fill out the formThreaded cartridge heater with a 201 stainless steel tube and DN15 connection, designed for liquid heating applications.
Electric threaded cartridge heating element for liquid and mold heating applications, featuring a 201 stainless steel tube and integrated wire leads.
DN25 threaded single-ended electric cartridge heater designed for water heating applications with 201 stainless steel construction.
Threaded cartridge heating element with DN6 NPT connection and 6mm stainless steel tube for liquid and mold heating.
Threaded cartridge heater with DN10 NPT connection and 201 stainless steel tube for liquid heating applications.
NPT threaded cartridge heater with 201 stainless steel tube for liquid heating applications.
Threaded cartridge heating element with DN15 NPT connection for water heating, featuring a 12 mm tube diameter.
Threaded NPT cartridge electric heating element designed for plastic molding equipment and liquid heating media.
DN20 NPT threaded cartridge heater featuring a 16mm tube diameter for industrial molding and liquid heating applications.
Frequently asked questions
Practical guidance for choosing and using products in this category.
How do I select the correct cartridge heater size?
Check the sheath diameter and tolerance, insertion length, available mounting depth and lead-exit arrangement against the equipment drawing. Also match voltage, wattage and the required temperature-sensor type if one is built in.
The fit between the cartridge and its bore affects heat transfer. Use the heater manufacturer's specified bore tolerance for the application rather than choosing a part solely because it can be pushed into the hole.
Are BSP, NPT and metric heater threads interchangeable?
No. These are different thread systems, and a similar diameter or nominal size does not mean the fittings will seal or fit correctly. Check the specified thread family, size, pitch and sealing arrangement on both the heater and the equipment.
DN is a nominal size designation, not a measured outside diameter. For example, do not select a mounting hole or adaptor from a DN label alone. If the thread cannot be positively identified, provide the equipment specification and clear measurements before ordering.