Product Overview
Water lines and process pipe systems can become a real problem when temperatures drop below freezing. This self-regulating heating cable provides a reliable heating solution to prevent frost damage and keep liquids flowing at low temperatures. It is widely used for pipe and tank freeze protection, roof snow melting, soil warming for plants, and floor heating applications.
Key Features
- Self-regulating polymer core automatically adjusts heat output at each point along the pipe
- Parallel circuitry allows cutting at any point along its length without interrupting the heating circuit
- Safe for use on both plastic and metal pipes
- Energy-efficient design reduces overall seasonal power costs
Cable Structure
- Copper-core wire: 7 x 0.42 mm
- Conductive heating element
- High-density polyolefin outer jacket
- Metal braid explosion-proof shielding
Installation Instructions
- Unwind the heating cable completely before connecting to power. Never connect to power while wound up.
- If inflexible due to low temperatures, unwind and power briefly to soften.
- Ensure the pipe area is accessible and non-attached; do not route the heating cable behind walls.
- Place the thermostat contact tightly on the coolest point of the pipe and secure with insulating tape.
- Fasten the cable straight along the pipe every 30 to 60 cm with insulating tape.
- Insulate the water pipe and heating cable with mineral rock wool or foam (maximum insulation thickness: 13 mm).
- Protect the cable against mechanical damage, biting, and immersion in liquids.
- Plug the cable into the main power supply.
No reviews yet
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent