Product Overview
Insulated heat shrink butt connectors designed for standard crimping and reliable sealing. Featuring a dual-walled construction with polyolefin tubing on the outside and hot-melt adhesive on the inside, these connectors allow visual inspection while providing a corrosion-resistant and waterproof seal.
Features
- Dual-walled polyolefin tubing and hot-melt adhesive lining
- Provides a waterproof seal and prevents corrosion
- Allows visual inspection of the connection
- Tin-plated copper and PE construction
Specifications by Model
| Model | Cable Wire Size | Length | Max Current | Material |
|---|---|---|---|---|
| BHT0.5 (Yellow) | 0.2–0.5 mm² (26–22 AWG) | 28±1 mm | 9 A | Tin Plated Copper + PE |
| BHT1.25 (Red) | 0.5–1.5 mm² (18–22 AWG) | 38±1 mm | 19 A | Tin Plated Copper + PE |
| BHT2 (Blue) | 1.5–2.5 mm² (16–14 AWG) | 38±1 mm | 27 A | Tin Plated Copper + PE |
| BHT5 (Yellow) | 4–6 mm² (12–10 AWG) | 42±1 mm | 48 A | Tin Plated Copper + PE |
Installation Instructions
- Perform a standard crimp on the stripped wire inside the butt connector.
- Apply heat evenly using a hot air gun until the tubing shrinks in size and the internal adhesive flows to fill all gaps within the terminal.
No reviews yet
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent