Micro high-temperature MCH (metal ceramic) heating plate engineered for rapid thermal response, high thermal efficiency, and uniform heat distribution across compact footprints.
Features
- High-density tungsten paste printing heating material
- White multilayer alumina ceramic base plate with an α-Al2O3 content of not less than 95%
- High-temperature nickel wire leads with PTFE sheath
- Linear resistance-temperature relationship for simplified temperature control
- Resistant to acids, alkalis, and other corrosive substances
Available Options
- Size: 12x12x1.3mm
- Power, Voltage & Temperature: 1.5W / 3.7V / 110°C, 2.5W / 3.7V / 145°C, 3W / 5V / 160°C, 5W / 5V / 200°C, 7W / 3.7V / 270°C
Usage Instructions & Safety
- Long-term operation must remain within the rated voltage with temperature control strictly below 500°C.
- Avoid sudden thermal shock; sharp temperature differences can cause the heating plate to expand and damage the tungsten wire heating layer.
- Installation pressure must be maintained below 2 kg/cm²; using a special stainless steel circlip or elastic pressure is recommended.
- The lead connections are not waterproof; avoid direct contact with liquids.
No reviews yet
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent