Product Overview
Copper water heating element designed for liquid and water heating applications. Features a built-in probe hole and a copper threaded connection for secure mounting.
Features
- Copper tube and thread construction
- Includes a probe hole for temperature sensing
- Available in multiple power ratings, voltages, and tube lengths
Available Options
- Thread Size: DN32 (41mm), DN40 (47mm), DN50 (58mm)
- Power / Tube Length: 3KW (195mm), 4.5KW (225mm), 6KW (240mm), 9KW (285mm), 12KW (360mm)
- Voltage: 110V, 220V, 380V
Instructions for Use
- Before installation, use a multimeter to measure the power and check electrical continuity.
- Ensure the heating element is fully immersed in liquid during operation. Dry burning is strictly prohibited.
- Power allowance follows international standards at -10% to +5%, and size allowance is plus or minus 0.5mm.
Safety & Notices
- Designed exclusively for water and liquid heating; dry heating is not supported.
- Copper material is suitable for water with partial alkalinity. Do not use in overly acidic water.
- Minor surface imperfections such as weld marks, stainless steel traces, or polish marks are normal for industrial heating products.
- The internal heating wire is made of OCr25Al5 which is magnetic, so the element may be adsorbed by a magnet.
Package Contents
- 1 x Heater Element
- 1 x Silicone Gasket
- 1 x Cap
No reviews yet
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent