Threaded Immersion Heaters

Electric Immersion Tubular Heating Element with Threaded Connection for Boilers and Brewing

Reference: AH100206
Electric immersion tubular heating element for boilers and brewing systems, featuring a threaded copper connection and stainless steel tube.

Choose configuration

Power
Tube Length
Voltage
Thread Size
Product overview

Electric Immersion Tubular Heating Element

Designed for boilers, brewing systems, and general liquid heating applications, this tubular immersion heating element features a durable 304 stainless steel tube and a threaded copper connection. Available in multiple power ratings, voltages, thread sizes, and tube lengths to suit your specific installation requirements.

Key Features

  • Tube Material: 304 Stainless Steel
  • Thread Material: Copper
  • Power Allowance: -10% to +5%
  • Size Allowance: ±0.5 mm

Available Options

  • Thread Size: DN32 (41 mm), DN40 (47 mm), DN50 (58 mm)
  • Power & Tube Length Combinations: 3 kW (195 mm), 4.5 kW (225 mm), 6 kW (250 mm), 9 kW (285 mm), 12 kW (360 mm)
  • Voltage: 110V, 220V, 380V

Applications & Usage Restrictions

  • Application: Designed for water and liquid heating only. Cannot be dry burned.
  • Water Quality Guidance: Copper material is suitable for water with partial alkalinity. Do not use copper material if the water quality is acidic. For high corrosion resistance against aggressive water quality, Incoloy 800 is recommended.

Installation Instructions & Safety Warnings

  • Before installation, use a multimeter to verify electrical resistance and power output.
  • Note that heating elements are industrial products and may exhibit normal manufacturing traces such as welds, stainless steel marks, or polish traces.
  • The internal heating wire is made of OCr25Al15, which is magnetic; it is normal for the element to be adsorbed by a magnet.

Package Contents

  • 1 x Tubular Heating Element
  • 1 x Silicone Gasket
  • 1 x Cap
Custom made

Need a custom heating element?

Send us dimensions, voltage, power, material, and photos. We will manufacture a custom heating element for your application.

Fill out the form
Technical data

Specifications

Voltage 110 V / 220 V / 380 V (Across offered models)
Power 3 kW to 12 kW (Across offered models)
Tube Length 195 mm to 360 mm (Across offered models)
Tube Diameter 8 mm / 10 mm
Thread Material Copper
Tube Material 304 Stainless Steel
Product Type Tubular Electrical Immersion Heater
Thread Size DN32 (41 mm) / DN40 (47 mm) / DN50 (58 mm)
Application Water and liquid heating
Loading...
Back to top