Overview
Single-ended electric heating pipes, also known as straight single-header heating pipes, are designed to be embedded in mold holes to provide direct thermal heating. They feature an internal heating wire and magnesia powder packed inside a stainless steel tube.
Specifications
| Property | Value |
|---|---|
| Material | 201 Stainless Steel |
| Voltage | 220V, 120V, 110V (variant dependent) |
| Tube Diameter | 8mm to 16mm (variant dependent) |
| Tube Length | 30mm to 180mm (variant dependent) |
| Power | 120W to 650W (variant dependent) |
| Wire Length | 300mm |
Working Temperature Range
- 201SS: 250-300°C
- 304SS: 400-600°C
- 310SS: 600-800°C
Available Options
- 220V 350W 12.5x165mm
- 220V 130W 12x100mm
- 220V 420W 16x105mm
- 120V 150W 9.5x76mm
- 220V 260W 16x68mm
- 220V 400W 16x100mm
- 220V 260W 15x70mm
- 220V 280W 15x75mm
- 220V 260W 8x130mm
- 220V 270W 8x135mm
- 220V 250W 8x120mm
- 220V 120W 16x30mm
- 220V 440W 13x135mm
- 220V 450W 13x140mm
- 220V 160W 16x40mm
- 220V 200W 16x50mm
- 220V 540W 12x180mm
- 110V 250W 9.5x150mm
- 220V 240W 16x60mm
- 220V 300W 15x80mm
- 220V 330W 15x90mm
- 220V 450W 15x120mm
- 220V 500W 15x135mm
- 220V 350W 15x100mm
- 220V 400W 15x110mm
- 220V 650W 13x200mm
- 220V 350W 15x98mm
Applications
- Abrasives heating
- Core shooting machines
- Packaging machinery
- Flat vulcanizing machines
- Stamping dies
- Hot cutting knives
- Injection molds and extrusion molds
- Rubber molding molds
- Meltblown molds
- Hot press molding machinery
- Semiconductor processing
- Uniform heating platforms
Instructions for Use
- Before use, measure the power using a multimeter to confirm functionality before installation.
- Ensure correct wiring methods are used to avoid slow heating or damage.
- Note that cartridge heaters are not applicable to direct liquid and open air heating in standard spot configurations.
- Power Allowance is -10% to +5% (unheated).
- High pressure strength (unheated): 1500V.
- Insulation resistance (unheated): ≥1.5MΩ.
- Length error: ±1.5mm.
- Length of terminal without heating: 3-20mm.
- Length of bottom unheated zone: 3-9mm.
No reviews yet
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent