Immersion electric heating element designed for hexagonal mold temperature machines, water tank mold temperature machines, solar electric heating tubes, and boiler heating tubes. This heating element must not be dry burned.
Features
- Voltage: 220V
- Power Allowance: -10% to +5%
- Package Contents: 1x heater, 1x silicone gasket, 1x cap
Available Options
- DN50 12KW 350mm
- DN40 6KW 250mm
- DN50 6KW 250mm
- DN50 9KW 295mm
- DN40 12KW 350mm
- DN40 9KW 295mm
Material Selection Guide
- Copper material and Incoloy are upgrades over standard stainless steel.
- Copper material is suitable for water with partial alkalinity; do not use copper in acidic water.
- If copper or 304 stainless steel cannot withstand water corrosion, Incoloy 800 offers heat resistance, corrosion resistance, and anti-oxidation properties.
Instructions and Warnings
- Industrial products may exhibit normal manufacturing flaws such as welds, stainless steel traces, and polish traces.
- The internal heating wire is made of OCr25A15, which is magnetic; it is normal for the element to be adsorbed by a magnet.
- Before installation, use a multimeter to measure the power.
- Dry burning is prohibited.
No reviews yet
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent