MCH Ceramic Heaters

MCH High Temperature Alumina Ceramic Heating Plate Dry-Burning Heating Element

Reference: AH100386
High-temperature MCH metal ceramic heating plate featuring an alumina ceramic body and tungsten heating paste for rapid, uniform thermal response.

Choose configuration

Power
Voltage
Temperature
Product overview

Overview

The MCH (Metal Ceramics Heater) heating plate is constructed by printing high-density tungsten paste onto a ceramic casting blank, laminating, and co-firing alumina ceramic and metal together in a hydrogen atmosphere at 1600 °C. It provides rapid temperature rise, high thermal efficiency, good thermal conductivity, and uniform heating.

Features

  • High-density tungsten paste printing heating material
  • White multilayer alumina ceramic base plate (alpha-Al2O3 content not less than 95%)
  • Lead wire made of high-temperature 0.5 mm nickel wire with PTFE sheath
  • Resistant to acids, alkalis, and corrosive substances
  • Surface is safe and uncharged, capable of withstanding a withstand voltage test of 4500V/1S without breakdown with a leakage current less than 0.5 mA

Available Options

  • 7V 2W 160C
  • 5V 0.4W 80C
  • 3.7V 0.5W 90C
  • 5V 4W 240C
  • 12V 2.5W 200C
  • 5V 0.8W 100C
  • 5V 2W 140C
  • 12V 22W 500C
  • 15V 16W 400C
  • 12V 5W 270C
  • 12V 10W 300C
  • 24V 10W 300C
  • 24V 20W 500C

Operating Instructions & Safety Warnings

  • Long-term work must be operated within the rated voltage and at temperatures under 500 °C.
  • Avoid sudden hot and cold thermal shock; sharp temperature differences can cause the heating plate to expand and damage the tungsten wire heating layer.
  • Installation pressure must be less than 2 kg/cm²; it is recommended to use a special stainless steel circlip or elastic pressure.
  • The lead is best connected via a snap-on method with a high-temperature resistant wire.
  • The lead connection of the heating body is not waterproof; avoid contact with liquids.

Package Contents

  • 1 x MCH Heater
Custom made

Need a custom heating element?

Send us dimensions, voltage, power, material, and photos. We will manufacture a custom heating element for your application.

Fill out the form
Technical data

Specifications

Product Type MCH Heater
Dimensions 7 × 5 × 1.2 mm
Lead Wire Material 0.5 mm nickel wire with PTFE sheath
Plate Material White multilayer alumina ceramic
Operating Temperature 500 °C
Loading...
Back to top