Threaded Immersion Heaters

Tubular Immersion Heater 1.5 Inch BSP DN40 Heating Element for Water and Oil

Reference: AH100437
DN40 1.5-inch BSP tubular immersion heater in 304 stainless steel for water and oil, featuring an integrated grounding screw.

Choose configuration

Power
Tube Length
Voltage
Color / Finish
Product overview

Product Overview

Designed for liquid heating applications such as breweries, distilling machines, water tanks, boilers, and reaction kettles, this DN40 tubular immersion heater is constructed from durable 304 stainless steel for both the tube and threaded connection. It features an integrated grounding screw for electrical safety.

Features

  • Thickened SUS304 stainless steel tube construction
  • High-temperature resistance heating wire and insulation powder
  • Equipped with an integrated grounding screw
  • Power tolerance rating: -10% to +5% (international standard)

Available Options

  • Power & Tube Length: 3 kW (195 mm), 4.5 kW (230 mm), 6 kW (250 mm), 9 kW (295 mm), 12 kW (355 mm)
  • Voltage: 220V, 380V

Specifications Table

PropertyValue
Thread SizeDN40 (1.5 inch BSP, 47 mm diameter)
Tube Diameter8 mm
Tube Material304 stainless steel
Thread Material304 stainless steel
GroundingYes

Instructions for Use & Safety Warnings

  • No Dry Burning: This heater is intended for water and oil immersion only. Never operate dry. When heating in oil, keep the temperature under 300 °C.
  • Pre-Installation Check: Before installation, use a multimeter to measure the power and verify continuity.
  • Manufacturing Notes: Industrial heating elements may exhibit minor normal marks such as weld lines, stainless steel traces, or polish traces. The internal OCr25Al15 heating wire is magnetic, making it normal for the element to be slightly adsorbed by a magnet.

Package Contents

  • 1 x Tubular Heater
  • 1 x Silicone Gasket
  • 1 x Cap
  • 1 x PG11 Connector
Custom made

Need a custom heating element?

Send us dimensions, voltage, power, material, and photos. We will manufacture a custom heating element for your application.

Fill out the form
Technical data

Specifications

Voltage 220 V / 380 V (Across offered models)
Power 3 kW / 4.5 kW / 6 kW / 9 kW / 12 kW (Across offered models)
Tube Length 195 mm / 230 mm / 250 mm / 295 mm / 355 mm (Across offered models)
Tube Diameter 8 mm
Thread Diameter 47 mm
Thread Material 304 stainless steel
Tube Material 304 Stainless Steel
Thread Size DN40 (1.5 in)
Grounding Yes
Application Water tank, boiler, reaction kettle, heat-conducting oil stove, brewery, distilling machine
Model Number DN40
Loading...
Back to top