Product Overview
High-temperature Metal Ceramics Heater (MCH) plate constructed from white multilayer alumina ceramic with an alpha-Al2O3 content of not less than 95%. It utilizes high-density tungsten paste printing for the heating material and features 0.5mm nickel wire leads with a PTFE sheath.
Available Options
- 3.7V 3W 80C
- 5V 4W 90C
- 5V 5W 120C
- 12V 24W 250C
- 12V 28W 300C
- 15V 45W 400C
- 20V 70W 500C
- 24V 80W 500C
- 24V 115W Tem ctrl
Features
- Simple structure with good thermal uniformity and a high power density of ≥ 45 W/cm²
- Linear resistance-temperature change for easy temperature control via resistance or voltage
- Rapid temperature rise and thermal compensation
- High thermal efficiency, uniform heating, and energy saving (unit heat consumption is 20-30% lower than PTC)
- Good insulation performance with a surface that remains uncharged; withstands a voltage test of 4500V/1S without breakdown and a leakage current of less than 0.5mA
- Resistant to acid, alkali, and other corrosive substances
Specifications Table
| Property | Value |
|---|---|
| Product Type | MCH heating plate |
| Plate Material | White multilayer alumina ceramic (α-Al2O3 content ≥ 95%) |
| Heating Element Material | High-density tungsten paste |
| Lead Wire Material | High temperature 0.5mm nickel wire + PTFE sheath |
| Operating Temperature | Within 500 °C |
Usage Instructions & Safety Warnings
- For temperature control use, long-term operation must remain within the rated voltage and temperatures under 500 °C.
- Avoid thermal shock. Sharp temperature differences can cause the heating plate to expand and damage the tungsten wire heating layer.
- Installation pressure must be less than 2 kg/cm²; it is recommended to use a special stainless steel circlip or elastic pressure.
- The lead is best connected via a snap-on method with a high-temperature resistant wire.
- The heating body lead connection is not waterproof; avoid contact with liquids.
Applications
Widely used in daily life, industrial and agricultural technology, communications, environmental protection, industrial drying equipment, and electric heat adhesive devices such as hair straighteners, hair curlers, heaters, cigarette lilies, electronic cigarettes, aromatherapy ovens, air conditioners, instant water heaters, faucets, multi-function microwave ovens, clothes dryers, coffee pots, medical devices, and infrared physiotherapy instruments.
No reviews yet
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent