Product Overview
The MCH (Metal Ceramics Heater) aluminum oxide ceramic heating plate delivers high efficiency, rapid thermal response, and consistent heat distribution. Crafted from high-density tungsten paste printing and white multilayer alumina ceramic, it offers excellent resistance to acids, alkalis, and corrosion.
Key Features
- Efficient Heating: Delivers quick and consistent heat with high thermal efficiency and rapid temperature compensation.
- Chemical Resistance: Resistant to acids, alkalis, and other corrosive substances for extended durability.
- High Temperature Resistance: Built to withstand elevated operating temperatures for demanding applications.
- Good Insulation Performance: Surface remains safe and uncharged, capable of withstanding voltage tests without breakdown.
Technical Specifications
| Property | Value |
|---|---|
| Length | 70 mm |
| Width | 12 mm |
| Plate Material | White multilayer alumina ceramic (a-Al2O3 content not less than 95%) |
| Lead Wire Material | 0.5 mm high-temperature nickel wire with PTFE sheath |
| Maximum Operating Temperature | 500 °C |
Available Options
- 24V 36W 300C
- 36V 80W 42C
- 48V 140W 500C
- 60V 220W temp contr
- 5V 1.5W 45C
- 12V 9W 160C
- 110V 80W 420C
- 110V 90W 400C
- 220V 300W temp contr
Usage Instructions & Safety Warnings
- For temperature control use, long-term work must be operated within the rated voltage and below 500 °C.
- Avoid thermal shock. Sharp temperature differences can cause the heating plate to expand and damage the tungsten wire heating layer.
- Installation pressure must be kept under 2 kg/cm²; using a special stainless steel circlip or elastic pressure is recommended.
- The lead wire is best connected via a Snap-on method using a high-temperature resistant wire.
- The heating body lead connection is not waterproof; avoid contact with liquids.
No reviews yet
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent