Product Overview
This DN40 1.5" BSP immersion heating element is designed for water and oil heating applications such as brewery equipment, distilling machines, large water tanks, boilers, reaction kettles, and heat-conducting oil stoves. It features a thickened SUS304 stainless steel tube, high-temperature resistance wire, and high-temperature insulation powder.
Key Features
- Robust Construction: Made with SUS304 stainless steel tube and thread for durability.
- Integrated Safety: Includes a grounding screw and an 8 mm diameter by 120 mm length sensor probe.
- High-Temperature Resistance: Built with high-temperature resistance wire (OCr25Al15) and insulation powder.
Available Options
- Color: WHITE, Grey, black, Gold, Silver
- Power / Tube Length: 3KW 195mmL, 4.5KW 230mmL, 6KW 250mmL, 9KW 295mmL, 12KW 355mmL
- Voltage: 220V, 380V
Usage Instructions & Safety
- Do not dry burn. Heaters must be fully immersed in water or oil during operation.
- When heating in oil, keep the temperature under 300 °C.
- Power tolerance follows international standards at -10% to +5%.
- Before installation, use a multimeter to verify electrical resistance and power.
- Magnetic adsorption of the element is normal due to the internal OCr25Al15 heating wire composition.
Package Contents
- 1x Heater Element
- 1x Silicone Gasket
- 1x Cap
- 1x PG11 Connector
No reviews yet
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent