Thermoelectric Coolers

Semiconductor Thermoelectric Cooler Peltier Plate 40x40mm

Reference: AH100829
High-performance 40x40mm semiconductor thermoelectric cooling module for medical and laboratory temperature control.

Choose configuration

Model
Product overview

Product Overview

Semiconductor refrigeration chips utilize the thermoelectric effect of semiconductors. When direct current passes through a thermocouple formed by connecting two different semiconductor materials in series, the cold and hot ends respectively absorb and release heat, making them an ideal choice for temperature cycling applications.

This unit requires no refrigerant, can operate continuously without pollution sources or rotating parts, generates no rotary or sliding motion, runs without vibration or noise, features a long lifespan, and is easy to install.

Available Options

  • C1202
  • C1203
  • C1204
  • C1205
  • C1206
  • C12062S
  • C1208
  • C12082S
  • C1210
  • C1212
  • C1215

Installation and Usage Instructions

  • Thermal Management Warning: Never connect the module directly to a power supply without proper cooling. You must apply thermal conductive silicone grease and install a radiator or water-cooled cooling device on the heat dissipation surface prior to powering on.
  • Dry Power Warning: Powering on without heat dissipation for even a few seconds to ten seconds will cause both sides to heat rapidly and permanently burn out the cooling fins.
  • Hot End Temperature Limit: The hot surface temperature of the semiconductor cooler must not exceed 60 °C to prevent damage.
  • Condensation Control: When the ceramic surface temperature drops, condensation may occur. Keep the cooling surface around 20 °C by adjusting the operating voltage or fan speed, or install an anti-condensation insulation ring to isolate it from air.
  • Polarity Check: Before installation, test the module briefly with a dry battery to verify the hot and cold ends and record lead polarity.

Package Contents

  • 1 x Peltier Plate
Custom made

Need a custom heating element?

Send us dimensions, voltage, power, material, and photos. We will manufacture a custom heating element for your application.

Fill out the form
Technical data

Specifications

Voltage 12 V
Product Type Semiconductor Refrigeration Chip
Wire Length 150 mm
Dimensions 40 × 40 mm
Lead Wire Material High temperature nickel wire + PTFE sheath
Certification CE
Maximum Current 6 A
Maximum Voltage 15.8 V
Cooling Capacity 54 W
Loading...
Back to top