Overview
This DN50 2-inch threaded immersion heating element is designed for liquid heating applications such as water tanks, boilers, reaction kettles, and heat-conducting oil stoves. Built with a thickened SUS304 stainless steel tube and thread, high-temperature resistance wire, and high-temperature insulation powder.
Features
- SUS304 thickened tube and thread construction
- Equipped with a ground screw terminal
- Includes silicone gasket, cap, and PG11 connector
Applications
- Heat-conducting oil stove
- Large water tank
- Boiler
- Reaction kettle
Available Options
- Voltage: 220V, 380V
- Power / Tube Length: 3KW (195mm), 4.5KW (230mm), 6KW (250mm), 9KW (295mm), 12KW (355mm)
Instructions & Warnings
- Do not dry burn. When heating in oil, keep the temperature under 300°C.
- Power tolerance allowance is -10% to +5%. Tube size allowance is 0.5mm.
- Before installation, use a multimeter to measure the power.
- The internal heating wire is made of OCr25A15 which is magnetic, so it is normal for the element to be adsorbed by a magnet.
No reviews yet
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent