High Purity Alumina Ceramic Substrate Sheet
This substrate is sintered by high-purity alumina (Al2O3). As a mainstream integrated material for heat dissipation and electrical isolation in the electronics industry, it features reliable insulation, efficient thermal conductivity, high mechanical strength, and stable chemical performance. Ideal for insulation, load-bearing, and heat dissipation of high-power electronic parts and high-temperature industrial equipment.
Features and Characteristics
- Excellent electrical insulation with dielectric strength up to 16 kV/mm, resisting breakdown under high voltage and high frequency, perfect for isolating IGBT, MOSFET, and power supply units.
- Thermal conductivity of 22 W/m·K, efficiently removing heat buildup to reduce component aging.
- Continuous working temperature up to 1400 °C, crack-proof under thermal shock, and acid and oil corrosion resistant.
- Smooth surface with tight dimensional tolerance, suitable for soldering and embedded installation.
Application Range
- Electronics: IGBT and MOSFET modules, LED substrates, sensor insulators
- Home Appliance: Heater insulation spacers, oven high-temperature gaskets
- Industrial: High-voltage instrument bases, anti-corrosion lining plates
Available Options
- Size: 138x190x0.635mm, 138x190x0.66mm, 138x190x0.8mm, 140x190x1mm, 138x190x1mm, 138x157x0.8mm, 138x190x0.38mm, 138x190x0.5mm
Technical Properties
| Parameter | Value |
|---|---|
| Main Composition | Al2O3 >= 95% |
| Density | 3.6 g/cm³ |
| Water Absorption | 0% |
| Sintering Temperature | 1670 °C |
| Hardness | 1600 HV |
| Flexural Strength 4pt | > 2900 MPa |
| Compressive Strength | 25000 Kgf/cm² |
| Max. Service Temperature | 1400 °C |
| Thermal Expansion Coefficient | 7.8 x 10⁻⁶/°C (0–1000°C) |
| Thermal Shock Resistance | 220 °C |
| Thermal Conductivity | 22 W/m·K |
| Volume Resistivity | > 10¹² Ω·cm |
| Dielectric Breakdown Strength | 16 kV/mm |
| Dielectric Constant @1MHz | 9.0 – 10 |
Package Contents
- 1 x Ceramic plate
No reviews yet
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent