Product Overview
This two-phase DC brushless water pump is designed for circulation, fountains, medical equipment, and booster applications. It features an IP68 waterproof rating and a robust ABS shell construction.
Available Options
| Voltage | Current | Power | Maximum Flow Rate | Maximum Head |
|---|---|---|---|---|
| 12 V | 1.5 A | 18 W | 1500 L/h | 3 m |
| 24 V | 2 A | 48 W | 2000 L/h | 5 m |
Technical Specifications
- Wire Length: 1.5 m
- Waterproofing Grade: IP68
- Ambient Temperature: -40 to 100 °C
- Liquid Temperature: -40 to 100 °C
- Operating Humidity: Less than 90 %RH
- Acoustic Noise: Less than 40 dB
- Shell Material: ABS
- Motor Magnets: Ferrite magnets
- Motor Wire: QZ enameled copper wire (resistant up to 200 °C)
Usage Precautions
- The pump operates on DC power only (e.g., battery or DC transformer) within the prescribed voltage range. 220 V AC voltage cannot be used directly.
- Strictly prohibited from running dry or idling without water for a long time.
- Strictly prohibited from use in acidic or alkaline solutions.
- Strictly prohibited from processing liquid impurities and particles greater than 0.25 mm in diameter. Clear the pump chamber of impurities promptly if the water is dirty.
- Must be installed below the water level or fully submerged; this is not a self-priming pump.
- Continuous running is supported when used correctly.
Package Contents
- 1 x DC Water Pump
No reviews yet
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent