Overview
This compact brushless DC water circulation pump is designed for reliable and energy-efficient fluid transfer in fountains, medical equipment, and general water circulation applications. Featuring a durable ABS shell and a ferrite magnet motor with 2UEW enameled copper wire rated up to 130 °C, it ensures stable, long-lasting performance.
Key Features
- Brushless DC motor for energy efficiency and long operational lifespan
- Quiet operation with a noise level under 35 dB
- Durable ABS pump shell construction
- Suitable for water and nonflammable liquids with good fluidity
Operating Limits & Specifications
- Ambient Temperature Range: -40 °C to 100 °C
- Operating Humidity: Less than 90% RH
- Liquid Temperature Range: -40 °C to 100 °C (Not recommended for hot water above 60 °C without prior consultation)
- Maximum Water Head / Lift: 5.5 m
- Motor Enameled Wire: 2UEW (resistant up to 130 °C)
- Motor Magnets: Ferrite magnets
- Shell Material: ABS
Important Notices
220V AC voltage cannot be used directly.
- Water head indicates internal pipe height, not spraying height.
- Flow rate is based on standard horizontal testing and varies depending on your application and pipe diameter.
- This is not a self-priming pump; it must be installed below the water level or fully submersible.
- Continuous running is fully supported when operated correctly.
No reviews yet
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent