Mini DC Water Pumps

DC Submersible Water Pump Large Flow Pool and Solar Circulation Pump

Reference: AH100923
Compact DC submersible water pump offering up to 2000 L/H flow and IP68 waterproof rating for pools, solar setups, and circulation.

Choose configuration

Power
Voltage
Current
Maximum Flow Rate
Maximum Head
Product overview

Product Overview

This DC submersible water pump is designed for water transfer, fountains, pool circulation, and solar water systems. Featuring an IP68 waterproof rating, durable nylon shell, and efficient ferrite magnet motor, it delivers reliable performance across multiple low-voltage power supplies.

Technical Specifications

FeatureSpecification
Model NumberJT-1000C
Pump TypeSubmersible Pump
Power SourceElectric
CertificationCE
Input Voltage12 V / 24 V (Across offered models)
Operating Current1.5 A (12 V) / 2 A (24 V)
Power18 W (12 V) / 48 W (24 V)
Maximum Head3 m (12 V) / 5 m (24 V)
Maximum Flow Rate1500 L/h (12 V) / 2000 L/h (24 V)
Wire Length1.5 m
Connector Type5.5 x 2.1 mm Female Plug
Shell MaterialNylon PA66 + 30% glass fiber
Waterproofing GradeIP68

Precautions for Use

  • The pump is a DC pump and must be powered by a compatible DC power source such as a battery or transformer within the prescribed voltage range.
  • 220V AC voltage cannot be used directly.
  • It is strictly prohibited to run the pump dry without water for a long time.
  • It is strictly prohibited to use in acidic and alkaline solutions.
  • Avoid liquid impurities and particles greater than 0.25 mm in diameter. Clear impurities from the pump chamber promptly if the water is dirty.

Pre-Purchase Notices

  • Water head indicates the height inside of a pipe, not the spraying height.
  • Maximum flow rate is based on horizontal conditions in standard tests; actual flow varies depending on application and pipe diameter.
  • The pumps are not self-priming and must be installed below the water level or fully submerged.
  • Continuous running is supported when used correctly.
Custom made

Need a custom heating element?

Send us dimensions, voltage, power, material, and photos. We will manufacture a custom heating element for your application.

Fill out the form
Technical data

Specifications

Power 18 W / 48 W (Across offered models)
Model Number JT-1000C
Wire Length 1.5 m
Shell Material Nylon PA66 + 30% glass fiber
Power Source Electric
Certification CE
Current 1.5 A / 2 A (Across offered models)
Pump Type Submersible Pump
Input Voltage 12 V / 24 V (Across offered models)
Connector Type 5.5 x 2.1 mm Female Plug
Maximum Flow Rate 1500 L/h / 2000 L/h (Across offered models)
Maximum Head 3 m / 5 m (Across offered models)
Loading...
Back to top