Product Overview
Micro DC water pump suitable for water circulation, garden plants, ponds, farm cultivation, and fountains.
Technical Specifications
- Ambient temperature: -40 °C to 100 °C
- Operating humidity: Less than 90% RH
- Liquid temperature: -40 °C to 100 °C
- Using liquid: Water or nonflammable liquid with good fluidity
- Noise: Less than 45 dB
- Pump shell material: ABS
- Motor magnet: Ferrite magnets
- Motor enameled copper wire: QZ (resists 100 °C)
Precautions for Use
- The water pump is a DC pump and must be powered by a DC power supply (such as a battery or DC transformer) within the prescribed voltage range. 220 V AC voltage cannot be used directly.
- It is strictly prohibited to run without water for a long time (idling).
- It is strictly prohibited to use in acidic and alkaline solutions.
- It is strictly prohibited to use in liquids with impurities and particle permeability greater than 0.35 mm. Clear impurities from the pump chamber in a timely manner if the water is dirty.
Notices Before Purchase
- Water head does not mean spraying height, but means the height inside of a pipe.
- The maximum flow rate is based on horizontal conditions in standard test conditions; actual flow will vary by application.
- Pumps are not self-priming and must be installed below the water level or submerged.
- Continuous running is permitted.
- Pipe diameter directly affects the flow rate.
Package includes 1 x DC water pump.
No reviews yet
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent