The JT-1000CT is a brushless DC centrifugal water pump designed for high lift applications such as medical equipment and fountains. Built with a durable nylon PA66 and 30% glass fiber shell, it delivers reliable and continuous fluid circulation.
Features
- Brushless DC motor design
- Centrifugal pump structure
- Equipped with ferrite magnets and QZ enameled copper wire
- Low operating noise under 45 dB
Specifications Table
| Property | Value |
|---|---|
| Model Number | JT-1000CT |
| Pump Type | Centrifugal Pump |
| Structure | Submersible Pump |
| Shell Material | Nylon PA66 + 30% glass fiber |
| Wire Length | 1.5 m |
| Ambient Temperature Range | -40 to 100 °C |
| Liquid Temperature | -40 to 100 °C |
| Operating Humidity | Less than 90% RH |
| Certification | CE |
Usage Instructions & Warnings
- 220 V AC voltage cannot be used directly. Must be used with a compatible DC power supply such as a battery or transformer within the prescribed voltage range.
- Strictly prohibited from running dry or idling without water for a long time.
- Strictly prohibited for use in acidic and alkaline solutions.
- Strictly prohibited from pumping liquids containing impurities or particles greater than 0.35 mm in diameter. Clear pump chamber impurities in a timely manner.
- Pumps are not self-priming. Must be installed below the water level or fully submerged.
- Water head refers to the vertical height inside a pipe, not the spraying height. Maximum flow rate is measured horizontally under standard test conditions.
Package Contents
- 1 x DC Water Pump
No reviews yet
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent