PT100 platinum thermal resistance temperature sensor featuring an M16x1.5mm threaded connection and a durable 304 stainless steel probe.
RTD Temperature Sensors
RTD temperature sensors such as PT100 and PT1000 probes measure temperature through a predictable change in electrical resistance. They provide stable measurement for industrial equipment, tanks, pipes and control systems.
Select the RTD type, wiring configuration, probe dimensions, temperature range, cable and mounting thread. Use a controller or instrument configured for the same sensor and connection method.
Recommended
PT100 screw temperature sensor probe featuring a stainless steel shielded cable for industrial monitoring.
PT100 end-face RTD temperature sensor featuring a ceramic-platinum element, shielded cable, and high temperature stability up to 420°C.
Compact bare mount PT100 platinum RTD temperature sensor chip designed for motor coils and industrial temperature measurement.
Needle-shaped PT100 and PT1000 RTD temperature sensor probe with a 1m silicone PTFE shielded cable for accurate liquid and industrial measurement.
PT100 RTD temperature sensor probe with 6x50mm tube and threaded mounting connection for precise temperature monitoring.
Corrosion-resistant PT100 platinum resistance temperature sensor probe with a multi-layer PTFE protective design for harsh chemical environments.
CU50 copper resistance temperature sensor with a waterproof stainless steel probe, M12x1 thread, and 1.5 m cable.
Surface temperature probe designed for solid media and liquids with a fast thermal response and 1.3 m wire.
Accurate PT100 platinum RTD temperature sensor featuring a 316L stainless steel probe and waterproof polyfluoride lead cable.
PT100 platinum thermal resistance temperature sensor featuring a 5x30mm probe, stainless steel braided shield, and M12x1.5 mounting thread.
PT100 RTD temperature sensor probe featuring a compression spring, M12 thread, and shielded wire for reliable measurement.
Frequently asked questions
Practical guidance for choosing and using products in this category.
How do I check whether a temperature sensor will work with my controller?
Match the sensor technology and the controller's supported input: for example, thermocouple type, RTD type or NTC specification. For NTC sensors, both the resistance at the stated reference temperature and the resistance-temperature curve must match; a 10 kΩ label alone does not establish compatibility.
Check the wiring arrangement, connector, measuring range and probe suitability for the application. Do not assume that sensors with similar plugs or appearances are interchangeable.