Underfloor Heating Mats

Electric Underfloor Heating Mat Twin Conductor Self-Adhesive Floor Warming System

Reference: AH101025
Twin conductor electric underfloor heating mat with self-adhesive backing for simple installation under various floor types.

Choose configuration

Length
Width
Product overview

Product Overview

This electric underfloor heating mat is designed for simple floor warming within living areas where primary heating is not essential and there are alternative heating sources available, such as radiators. It can also serve as a primary heat source in certain circumstances when used with proper flooring insulation. Featuring a self-adhesive backing, this ultra-thin heating mat installs easily beneath concrete, wooden, old tile, or terrazzo floors.

Product Advantages

  • Easy to install, suitable for a variety of ground decoration materials
  • Installs directly into tile adhesive with almost no impact on floor elevation
  • Can be laid directly onto the original ground without complex surface preparation
  • Reaches expected ground temperature within 20 to 30 minutes after startup

Main Parameters

Technical PropertySpecification
Cable ConstructionTwin conductor
Operating Voltage230 V
Power Output200 W/m2
Cable Spacing100 mm
Cable Diameter3.6 mm ± 1
Minimum Bending Radius25 mm
Conductor InsulationFluoropolymer/XLPE/Rubber
Outer InsulationPVC
Maximum Heating Temperature60~80 °C
Minimum Installation Temperature5 °C
Length of Cold Lead2.25 m

Available Options

  • 50 cm x 1 m
  • 50 cm x 2 m
  • 50 cm x 3 m
  • 50 cm x 4 m
  • 50 cm x 5 m
  • 50 cm x 6 m
  • 50 cm x 7 m
  • 50 cm x 8 m
  • 50 cm x 9 m
  • 50 cm x 10 m
  • 50 cm x 12 m
  • 50 cm x 14 m
  • 50 cm x 16 m
  • 50 cm x 18 m
  • 50 cm x 20 m
  • 50 cm x 24 m
  • 50 cm x 30 m
Custom made

Need a custom heating element?

Send us dimensions, voltage, power, material, and photos. We will manufacture a custom heating element for your application.

Fill out the form
Technical data

Specifications

Voltage 230 V
Power 200 W/m2
Product Type Floor Heating Mats
Application Indoor floor heating
Insulation Material Fluoropolymer / XLPE / Rubber
Certification CE / RoHS
Installation Type Self-adhesive
Wire Diameter 3.6 mm ± 1
Cold Lead Length 2.25 m
Jacket Material PVC
Conductor Count Twin conductor
Loading...
Back to top