Compact micro DC water pump designed for solar water systems, heating beds, medical equipment, fountains, and general circulation. Built with an ABS shell and durable internal components.
Features
- Submersible design operating on low-voltage DC power
- Maximum flow rate up to 1100 L/h
- Quiet operation with a noise level under 35 dB
- Continuous running capability when operated correctly
Technical Specifications
- Ambient Temperature Range: -40 to 100 °C
- Liquid Temperature Range: -40 to 100 °C
- Operating Humidity: Less than 90% RH
- Pump Shell Material: ABS
- Motor Magnet: Ferrite magnets
- Motor Enameled Wire: 2UEW resistant up to 130 °C
Usage Instructions & Warnings
- 220V AC voltage cannot be used directly. Must use a compatible DC power supply such as a battery or transformer within the specified voltage range.
- Strictly prohibited without water for a long time (idling).
- Strictly prohibited for use in acidic and alkaline solutions.
- Strictly prohibited for use with liquid impurities and particles greater than 0.35 mm in diameter. Clean the pump chamber regularly if the water is dirty.
- Water head measures the height inside of a pipe, not the spraying height.
- Maximum flow rate is based on horizontal condition testing in standard conditions; actual flow will vary depending on application and pipe diameter.
- Pumps are not self-priming and must be installed below the water level or submerged.
No reviews yet
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent