Product Overview
This mini brushless DC water pump features a 1/4-point threaded connection and a 5.5x2.1mm female plug for easy power integration. Built with a durable nylon PA66 and glass fiber shell, it is suitable for water-cooled circulation, fountains, and general liquid transfer applications.
Available Options
| Voltage Range | Power | Maximum Lift | Maximum Flow Rate |
|---|---|---|---|
| DC 6 to 12V | 10 W | 3.3 m | 580 L/h |
| DC 12 to 24V | 17 W | 4.1 m | 650 L/h |
Technical Specifications
- Shell Material: Nylon PA66 + 30% glass fiber
- Motor Magnet: Ferrite magnets
- Wire Length: 1.5 m
- Connector Type: 5.5 x 2.1 mm female plug
- Ambient Temperature Range: -40 to 80 °C
- Liquid Temperature: -40 to 80 °C
- Operating Humidity: Less than 90% RH
- Noise Level: Less than 35 dB
Precautions for Use
- This is a DC pump and must be powered by a proper DC power source (such as a battery or compatible DC transformer) within the specified voltage range. Direct connection to 220V AC voltage is strictly prohibited.
- Strictly prohibited from dry idling without water for a long time.
- Strictly prohibited from use in acidic and alkaline solutions.
- Avoid liquids containing impurities or particles larger than 0.25 mm. Clear impurities from the pump chamber promptly if the water is dirty.
- Water head measures the vertical height inside a pipe, not the spraying height.
- Maximum flow rate is based on horizontal testing conditions; actual flow will vary depending on application and pipe diameter.
- The pump is not self-priming and must be installed below the water level or fully submersible.
No reviews yet
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent