Overview
The MCH (Metal Ceramics Heater) heating plate is constructed by printing high-density tungsten paste onto a ceramic casting blank, laminating, and co-firing alumina ceramic and metal together in a hydrogen atmosphere at 1600 °C. It provides rapid temperature rise, high thermal efficiency, good thermal conductivity, and uniform heating.
Features
- High-density tungsten paste printing heating material
- White multilayer alumina ceramic base plate (alpha-Al2O3 content not less than 95%)
- Lead wire made of high-temperature 0.5 mm nickel wire with PTFE sheath
- Resistant to acids, alkalis, and corrosive substances
- Surface is safe and uncharged, capable of withstanding a withstand voltage test of 4500V/1S without breakdown with a leakage current less than 0.5 mA
Available Options
- 7V 2W 160C
- 5V 0.4W 80C
- 3.7V 0.5W 90C
- 5V 4W 240C
- 12V 2.5W 200C
- 5V 0.8W 100C
- 5V 2W 140C
- 12V 22W 500C
- 15V 16W 400C
- 12V 5W 270C
- 12V 10W 300C
- 24V 10W 300C
- 24V 20W 500C
Operating Instructions & Safety Warnings
- Long-term work must be operated within the rated voltage and at temperatures under 500 °C.
- Avoid sudden hot and cold thermal shock; sharp temperature differences can cause the heating plate to expand and damage the tungsten wire heating layer.
- Installation pressure must be less than 2 kg/cm²; it is recommended to use a special stainless steel circlip or elastic pressure.
- The lead is best connected via a snap-on method with a high-temperature resistant wire.
- The lead connection of the heating body is not waterproof; avoid contact with liquids.
Package Contents
- 1 x MCH Heater
No reviews yet
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent