MCH Ceramic Heaters

Metal Ceramic Heating Plate Alumina Oxide High Temperature Heater Element

Reference: AH100412
Metal ceramic heating plate using alumina ceramic and tungsten paste for high-temperature applications across multiple voltage and power ratings.

Choose configuration

Power
Voltage
Temperature
Product overview

Metal Ceramic Heating Plate

This MCH (Metal Ceramics Heater) heating element is formed by printing metal tungsten paste onto an alumina ceramic casting blank, laminating, and sintering ceramic and metal together under a hydrogen atmosphere. It features corrosion resistance, high temperature resistance, rapid temperature rise, uniform thermal distribution, and energy-saving performance.

Features

  • High thermal efficiency and uniform heating
  • White multilayer alumina ceramic base plate (alpha-Al2O3 content not less than 95%)
  • High-temperature tungsten paste heating material
  • Nickel wire and PTFE sheath lead wires

Available Options

This product is available in multiple voltage, power, and temperature ratings:

  • 48V 50W 230C
  • 36V 130W 360C
  • 220V 50W 230C
  • 48V 150W 350C
  • 220V 150W 400C
  • 220V 100W 300C
  • 220V 250W 470C
  • 220V 200W 400C
  • 220V 300W Tem contro
  • 5V 2.5W 60C
  • 3.7V 1W 40C
  • 5V 16W 80C
  • 5V 5W 65C
  • 12V 10W 70C
  • 12V 3W 50C
  • 12V 100W 240C
  • 12V 14W 100C
  • 24V 38W 180C
  • 24V 12W 120C
  • 24V 120W 320C
  • 24V 55W 220C
  • 36V 85W 250C
  • 36V 30W 170C

Application Range

Widely used in appliances and equipment such as hair straighteners, hair curlers, aromatherapy ovens, instant water heaters, clothes dryers, coffee pots, and medical infrared physiotherapy instruments.

Safety and Usage Instructions

  • Long-term work must be within the rated voltage, with temperature control maintained within 500 °C.
  • Avoid sudden hot and cold temperature differences, as sharp changes can cause thermal expansion and damage the tungsten wire heating layer.
  • Installation pressure must be less than 2 kg/cm²; it is recommended to use a special stainless steel circlip or elastic pressure.
  • Leads should ideally be snap-on connected with a high-temperature resistant wire.
  • The heating body lead connection is not waterproof; avoid contact with liquids.
Custom made

Need a custom heating element?

Send us dimensions, voltage, power, material, and photos. We will manufacture a custom heating element for your application.

Fill out the form
Technical data

Specifications

Product Type MCH heating plate
Heating Element Type Tungsten paste printing heating material
Dimensions 50 × 50 × 2 mm
Lead Wire Material 0.5 mm nickel wire + PTFE sheath
Maximum Operating Temperature 500 °C
Plate Material Multilayer Alumina Ceramic (≥95% Al₂O₃)
Loading...
Back to top