Circular high-temperature MCH (Metal Ceramic Heater) alumina heating element designed for rapid thermal response and uniform heating across various applications. Built with a multilayer alumina ceramic base and tungsten heating circuitry.
Features
- Rapid temperature rise and thermal compensation
- High thermal efficiency and uniform heat distribution
- Good electrical insulation performance
- Resistant to acid, alkali, and corrosive substances
Available Options
- 3.7V 1.5W 100C
- 3.7V 2.5W 130C
- 3.7V 7W 240C
- 5V 1.1W 100C
- 5V 2.6W 180C
- 5V 5W 230C
- 5V 12.5W 370C
- 10V 50W Temp ctrl
- 12V 6W 250C
- 12V 15W 370C
- 12V 26W 500C
- 12V 70W Temp ctrl
- 18V 35W Temp ctrl
- 24V 25W Temp ctrl
- 24V 60W Temp ctrl
Specifications
| Property | Value |
|---|---|
| Outer Diameter | 14 mm |
| Inner Diameter | 6 mm |
| Plate Material | White multilayer alumina ceramic (alpha-Al2O3 content not less than 95%) |
| Heating Material | Tungsten paste |
| Lead Wire | 0.5 mm nickel wire with PTFE sheath |
| Working Temperature | Within 500 °C |
Installation & Safety Instructions
- Long-term work must be within the rated voltage and temperature control must remain below 500 °C.
- Avoid thermal shock; sharp temperature differences can cause the heating plate to expand and damage the tungsten heating layer.
- Installation pressure must be less than 2 kg/cm2; use a special stainless steel circlip or elastic pressure.
- Connect leads using a snap-on connection with high-temperature resistant wire.
- The lead connection of the heating body is not waterproof; avoid contact with liquids.
No reviews yet
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent