MCH Ceramic Heaters

MCH Alumina Ceramic Heating Element 35x35x1.3mm High-Temperature Micro Heater Plate

Reference: AH100509
High-temperature MCH alumina ceramic heating plate offering rapid thermal response, high power density, and reliable insulation performance.

Choose configuration

Power
Voltage
Temperature
Product overview

Product Overview

The MCH (Metal Ceramics Heater) alumina ceramic heating element is a high-performance heating plate formed by laminating and sintering tungsten heating paste with multilayer alumina ceramic. Designed for rapid thermal response and high thermal efficiency, it delivers uniform heating across various applications.

Features & Performance

  • High thermal efficiency and rapid temperature rise with fast thermal compensation.
  • Good thermal uniformity with a high power density of ≥ 45 W/cm².
  • Linear resistance-temperature change for easy temperature control.
  • Excellent insulation performance: withstands 4500V/1s voltage test without breakdown, with a leakage current of less than 0.5 mA.
  • Resistant to acid, alkali, and other corrosive substances for extended service life.

Available Options

  • 12V 8W 110C
  • 12V 12W 150C
  • 5V 2W 55C
  • 9V 6W 100C
  • 24V 48W 290C
  • 24V 60W 350C
  • 12V 15W 170C
  • 24V 30W 240C
  • 5V 2.5W 65C
  • 5V 1.5W 45C
  • 3.7V 1.5W 40C
  • 36V 130W 500C
  • 48V 130W Temp ctrl
  • 36V 75W 340C
  • 36V 100W 400C
  • 48V 200W Temp ctrl

Technical Specifications

PropertySpecification
Dimensions35 x 35 x 1.3 mm
Base Plate MaterialWhite multilayer alumina ceramic (α-Al2O3 ≥ 95%)
Heating MaterialHigh-density tungsten paste
Lead WireHigh-temperature Φ 0.5 mm nickel wire with PTFE sheath
Maximum Operating TemperatureWithin 500°C

Usage Instructions & Safety Warnings

  • Long-term operation must be within the rated voltage with temperature control kept under 500°C.
  • Avoid rapid thermal shocks (hot and cold); sharp temperature differences can cause plate expansion and damage the internal tungsten heating layer.
  • Installation pressure must be less than 2 kg/cm²; use a special stainless steel circlip or elastic pressure.
  • Leads should be snap-on connected with high-temperature-resistant wire.
  • The lead connection is not waterproof; avoid contact with liquids.

Application Range

Widely used in rapid heating devices such as hair straighteners, curlers, electronic cigarettes, aromatherapy ovens, instant water heaters, coffee pots, medical equipment, and industrial drying systems.

Custom made

Need a custom heating element?

Send us dimensions, voltage, power, material, and photos. We will manufacture a custom heating element for your application.

Fill out the form
Technical data

Specifications

Product Type MCH heating plate
Dimensions 35 × 35 × 1.3 mm
Lead Wire Material 0.5 mm nickel wire with PTFE sheath
Maximum Operating Temperature 500 °C
Plate Material Alumina Ceramic (≥95% Al₂O₃)
Loading...
Back to top