Overview
Electrical immersion heater designed for heating water and liquids in tanks and vessels. Features 304 stainless steel tubes and a copper threaded connection. Do not allow dry burning; the element must remain immersed in liquid during operation.
Available Options
- Thread Size / Tube Diameter: DN32 (1.25 in) / 8 mm, DN40 (1.5 in) / 8 mm, DN50 (2 in) / 10 mm
- Power & Tube Length: 3 kW (195 mm), 4.5 kW (220 mm), 6 kW (240 mm), 9 kW (285 mm), 12 kW (360 mm)
- Voltage: 110 V, 220 V, 380 V
Specifications Table
| Property | Value |
|---|---|
| Tube Material | 304 Stainless Steel |
| Thread Material | Copper |
| Heating Element Material | OCr25Al15 |
| Power Allowance | -10% to +5% |
| Tube Length Options | 195 mm, 225 mm, 240 mm, 285 mm, 360 mm |
| Tube Diameter Options | 8 mm, 10 mm |
| Thread Size Options | DN32 (1.25 in / 41 mm), DN40 (1.5 in / 47 mm), DN50 (2 in / 58 mm) |
Instructions & Warnings
- Before installation, use a multimeter to verify electrical resistance and power.
- Designed for liquid heating only; dry burning is strictly prohibited.
- Copper material is suitable for slightly alkaline water. Avoid use in highly acidic water quality.
- Minor weld traces, stainless steel marks, and polish traces are normal for industrial heating products.
- Internal heating wire is made of OCr25Al15, which is magnetic and may be adsorbed by a magnet.
Package Contents
- 1x Heater
- 1x Silicone gasket
- 1x Bakelite cover and PG11
No reviews yet
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent