Industrial immersion water heater element featuring a copper tube and threaded process connection, designed for water tanks, brewing equipment, fermentation vessels, and general liquid heating.
Features
- Copper tube and thread construction suitable for water with partial alkalinity
- Threaded mounting connection available in multiple sizes
- Designed for immersion in water and compatible liquids
Available Options
- Thread Size: DN32 (41 mm / 1.2 in), DN40 (47 mm / 1.5 in), DN50 (58 mm / 2 in)
- Power and Tube Length: 3 kW (195 mm), 4.5 kW (225 mm), 6 kW (240 mm), 9 kW (285 mm), 12 kW (360 mm)
- Voltage: 110 V, 220 V, 380 V
Instructions & Warnings
- The heating area must be fully immersed in liquid at all times; dry burning will destroy the electric heating pipe.
- Clean surface grease regularly to maintain service life and prevent degradation.
- Ensure terminals are effectively waterproofed to avoid electrical leakage.
- Power design per meter of heating pipe must not exceed 2 kW.
- Verify that the container is stable and secure before installation to prevent tipping, liquid dumping, and subsequent dry burning, fire, or electric shock hazards.
- Do not install the heating pipe at high-humidity air supply outlets, as dampness decreases insulation and may cause leakage or electric shock.
- Power allowance follows international standards at -10% to +5%; size tolerance is +0.5 mm to -0.5 mm.
- Measure power with a multimeter before installation.
Package Contents
- 1 x Heater Element
- 1 x Silicone Gasket
- 1 x Cap
No reviews yet
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent