Product Overview
Single-ended electric heating pipes, also known as straight single-header heating pipes, are designed to be embedded in drilled mold holes to provide efficient localized heating. This listing includes a pack of 2 cartridge heaters operating at 220V with 300mm wire leads.
Technical Specifications
| Property | Value |
|---|---|
| Product Type | Cartridge Heater |
| Voltage | 220V |
| Outer Material | 201 Stainless Steel |
| Inner Material | Heating Wire, Magnesia Powder |
| Wire Length | 300mm |
| High Pressure Strength (Unheated) | 1500V |
| Insulation Resistance (Unheated) | ≥1.5MΩ |
Available Options
This product is available in multiple model variants combining power ratings, tube diameters, and tube lengths across the offered options:
- 220V 300W 9.5x420mm
- 220V 560W 18x125mm
- 220V 570W 6x380mm
- 220V 640W 15x170mm
- 220V 700W 10x280mm
- 220V 750W 10x300mm
- 220V 760W 16x190mm
- 220V 800W 8x400mm
- 220V 860W 13x265mm
- 220V 900W 10x360mm
- 220V 900W 10x550mm
- 220V 900W 14x265mm
- 220V 950W 10x380mm
- 220V 960W 12x320mm
- 220V 1000W 8x500mm
- 220V 1000W 10x400mm
- 220V 1000W 12x340mm
- 220V 1000W 12x350mm
- 220V 1000W 12x500mm
- 220V 1000W 20x200mm
- 220V 1100W 12x360mm
- 220V 1400W 14x420mm
- 220V 1500W 12x500mm
- 220V 1500W 14x450mm
- 220V 1600W 17x380mm
- 220V 1600W 20x320mm
- 220V 1700W 14x500mm
Applications
Suitable for abrasives and mold heating. Common application industries include:
- Core shooting machines
- Packaging machinery
- Flat vulcanizing machines
- Stamping dies
- Hot cutting knives
- Injection molds
- Extrusion molds
- Rubber molding molds
- Meltblown molds
- Hot press molding machinery
- Semiconductor processing
- Uniform heating platforms
Important Restrictions
The spot heating elements are not applicable to liquid and air heating. Power allowance is -10% to +5% (not heated). Default tube diameter has a negative tolerance, and length has an error margin of ±1.5mm to ±2mm.
Instructions for Use
- Before use, please measure the power on a multimeter. If there is no problem after measuring, then it can be installed.
- Connect the cartridge heaters using the correct wiring method. Wiring errors can cause slow heating or damage.
No reviews yet
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent