Overview
The MCH (Metal Ceramic Heater) is an advanced micro heating element formed by printing a high-temperature tungsten paste onto a ceramic casting blank, then co-sintering the ceramic and metal together in a protective hydrogen atmosphere at 1600 °C. It provides exceptional corrosion resistance, high-temperature tolerance, long service life, high energy efficiency, and uniform thermal distribution.
Features & Characteristics
- Rapid Thermal Response: Fast temperature rise and quick thermal compensation speed.
- High Thermal Efficiency: Uniform heating with lower energy consumption compared to traditional PTC heaters.
- Excellent Insulation: Surface remains safe and uncharged, capable of withstanding a 4500V/1S voltage test without breakdown and with minimal leakage current.
- Chemical Resistance: Resistant to acids, alkalis, and other corrosive substances.
Available Options
- Dimensions: 5x5x2mm
- Voltage / Power: 3.7V 1.3W, 5V 2W, 9V 8W, 12V 14W
Specifications Table
| Property | Value |
|---|---|
| Product Type | MCH Electric Heater |
| Dimensions | 5x5x2mm |
| Plate Material | White multilayer alumina ceramic (a-Al2O3 content ≥ 95%) |
| Lead Wire Material | High temperature nickel wire with PTFE sheath |
Usage Instructions & Safety Warnings
- For temperature-controlled applications, long-term operation must remain within the rated voltage limits, with operating temperatures kept below 500 °C.
- Avoid rapid thermal shocks (hot and cold transitions) to prevent expansion damage to the tungsten wire heating layer.
- Installation pressure must be kept below 2 kg/cm²; using a specialized stainless steel circlip or elastic pressure method is recommended.
- Lead connections should ideally be snap-on connected using high-temperature-resistant wire.
- The lead wire connection of the heating body is not waterproof; avoid all contact with liquids.
No reviews yet
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent