Product Overview
This immersion water heating element features a 304 stainless steel tube and thread construction with an integrated grounding screw for safety. Suitable for various heating applications including water tanks, boilers, and oil stoves.
Key Features
- 304 Stainless Steel Construction: Thickened tube and thread material for durability.
- Grounding Screw: Equipped with an integrated ground screw for secure electrical installation.
- High-Temperature Resistance: Built with high-temperature resistance wire (OCr25A15) and high-temperature insulation powder.
Technical Specifications
| Property | Value |
|---|---|
| Tube Diameter | 8 mm |
| Tube Length | 190 mm / 210 mm / 250 mm / 290 mm / 355 mm (depending on model) |
| Thread Sizes | DN32 (42 mm / 1-1/4 inch), DN40 (47 mm / 1-1/2 inch), DN50 (58 mm / 2 inch) |
| Tri-Clamp | 2 inch (OD 64 mm) |
| Tube Material | 304 Stainless Steel |
| Thread Material | 304 Stainless Steel |
| Voltage | 220V / 380V |
| Power Options | 3 kW / 4.5 kW / 6 kW / 9 kW / 12 kW |
| Power Allowance | -10% to +5% |
Applications
- Heat-conducting oil stoves
- Large water tanks
- Boilers
- Reaction kettles
Instructions & Warnings
- Dry Burning Prohibition: Do not run dry. Ensure the element is fully immersed in liquid during operation. When heating oil, keep the temperature under 300 °C.
- Pre-Installation Check: Before installation, use a multimeter to measure the power and verify insulation.
- Manufacturing Notes: Industrial heating elements may exhibit normal weld, stainless steel, or polish traces. The internal heating wire (OCr25A15) is magnetic, so the element may be adsorbed by a magnet.
Package Contents
- 1 x Immersion Heater
- 1 x Silicone Gasket
- 1 x Cap
No reviews yet
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent