Overview
This high-temperature MCH (Metal Ceramics Heater) element is constructed by printing metal tungsten paste onto a multilayer alumina ceramic casting blank, then hot pressing, laminating, and sintering under a hydrogen atmosphere at 1600 °C. It provides rapid temperature rise, high thermal efficiency, and excellent chemical resistance against acids and alkalis.
Features
- High-density tungsten paste printing heating material
- White multilayer alumina ceramic base plate (alpha-Al2O3 content not less than 95%)
- Linear resistance-temperature change for easy control
- Rapid temperature rise and thermal compensation
- Good insulation performance with high dielectric withstand capability
Available Options
| Voltage / Power / Temperature Variant |
|---|
| 3.7V 1.3W 40°C |
| 3.7V 5W 120°C |
| 5V 2.5W 70°C |
| 5V 8W 170°C |
| 12V 14W 190°C |
| 12V 48W 390°C |
| 24V 55W 390°C |
| 24V 250W 500°C |
Usage Instructions & Safety Warnings
- Long-term operation must be maintained within the rated voltage and below 500 °C.
- Avoid sudden thermal shock. Sharp temperature differences can cause expansion and damage to the tungsten wire heating layer.
- Installation pressure must be kept under 2 kg/cm²; use a special stainless steel circlip or elastic pressure.
- Lead connections are not waterproof; avoid contact with liquids.
Applications
Widely used in hair straightening and curling irons, heaters, electronic cigarettes, aromatherapy ovens, instant water heaters and faucets, medical treatment devices, infrared physiotherapy instruments, and other rapid heating applications.
No reviews yet
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent