Product Overview
Semiconductor refrigeration chips utilize the thermoelectric effect of semiconductors. When direct current passes through a thermocouple formed by connecting two different semiconductor materials in series, the cold and hot ends respectively absorb and release heat, making them an ideal choice for temperature cycling applications.
This unit requires no refrigerant, can operate continuously without pollution sources or rotating parts, generates no rotary or sliding motion, runs without vibration or noise, features a long lifespan, and is easy to install.
Available Options
- C1202
- C1203
- C1204
- C1205
- C1206
- C12062S
- C1208
- C12082S
- C1210
- C1212
- C1215
Installation and Usage Instructions
- Thermal Management Warning: Never connect the module directly to a power supply without proper cooling. You must apply thermal conductive silicone grease and install a radiator or water-cooled cooling device on the heat dissipation surface prior to powering on.
- Dry Power Warning: Powering on without heat dissipation for even a few seconds to ten seconds will cause both sides to heat rapidly and permanently burn out the cooling fins.
- Hot End Temperature Limit: The hot surface temperature of the semiconductor cooler must not exceed 60 °C to prevent damage.
- Condensation Control: When the ceramic surface temperature drops, condensation may occur. Keep the cooling surface around 20 °C by adjusting the operating voltage or fan speed, or install an anti-condensation insulation ring to isolate it from air.
- Polarity Check: Before installation, test the module briefly with a dry battery to verify the hot and cold ends and record lead polarity.
Package Contents
- 1 x Peltier Plate
No reviews yet
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent