Thermoelectric Coolers

12V Semiconductor Refrigeration Chip Peltier Plate 40x40mm

Reference: AH100831
12V semiconductor refrigeration chip designed for temperature cycling applications. Features a 40x40mm footprint with high thermal performance.

Choose configuration

Chip Model
Product overview

Overview

Semiconductor refrigeration chips utilize the thermoelectric effect of semiconductors. When direct current passes through a thermocouple formed by connecting two different semiconductor materials in series, the cold and hot ends respectively absorb and release heat, making them an ideal choice for temperature cycling applications. No refrigerant is required, and the unit can work continuously without any pollution source or rotating parts.

Available Options

  • TEM1-12706
  • TEM1-12708

Installation and Usage Instructions

The unit cannot be directly connected to the power supply and must be properly cooled before being powered on. Directly powering on without heat dissipation will cause both sides to heat up rapidly, which will burn out the refrigeration fins within seconds.

  1. Apply thermal conductive silicone grease on the heat dissipation surface of the semiconductor refrigeration chip.
  2. Install the semiconductor refrigeration chip onto an appropriate radiator or water-cooled cooling device and place insulation pads around it.
  3. Connect to a suitable direct current power supply.

Safety Warnings

  • The hot surface temperature of the semiconductor refrigeration device should not exceed 60 °C, otherwise there is a risk of permanent damage.
  • Do not power on the refrigerator for an extended period without an adequate radiator or heat sink.
  • Condensation may occur when the ceramic surface temperature drops. Use an anti-condensation insulation and isolation ring to isolate it from ambient air.

Package Contents

  • 1 x Peltier Plate
Custom made

Need a custom heating element?

Send us dimensions, voltage, power, material, and photos. We will manufacture a custom heating element for your application.

Fill out the form
Technical data

Specifications

Voltage 12 V
Product Type Peltier Plate
Model Number TEM1-12706 / TEM1-12708
Dimensions 40 × 40 mm
Lead Wire Material High temperature nickel wire + PTFE sheath
Maximum Current 6 A / 8 A
Maximum Temperature Difference 66 °C
Loading...
Back to top