Product Overview
This DC submersible water pump is designed for water transfer, fountains, pool circulation, and solar water systems. Featuring an IP68 waterproof rating, durable nylon shell, and efficient ferrite magnet motor, it delivers reliable performance across multiple low-voltage power supplies.
Technical Specifications
| Feature | Specification |
|---|---|
| Model Number | JT-1000C |
| Pump Type | Submersible Pump |
| Power Source | Electric |
| Certification | CE |
| Input Voltage | 12 V / 24 V (Across offered models) |
| Operating Current | 1.5 A (12 V) / 2 A (24 V) |
| Power | 18 W (12 V) / 48 W (24 V) |
| Maximum Head | 3 m (12 V) / 5 m (24 V) |
| Maximum Flow Rate | 1500 L/h (12 V) / 2000 L/h (24 V) |
| Wire Length | 1.5 m |
| Connector Type | 5.5 x 2.1 mm Female Plug |
| Shell Material | Nylon PA66 + 30% glass fiber |
| Waterproofing Grade | IP68 |
Precautions for Use
- The pump is a DC pump and must be powered by a compatible DC power source such as a battery or transformer within the prescribed voltage range.
- 220V AC voltage cannot be used directly.
- It is strictly prohibited to run the pump dry without water for a long time.
- It is strictly prohibited to use in acidic and alkaline solutions.
- Avoid liquid impurities and particles greater than 0.25 mm in diameter. Clear impurities from the pump chamber promptly if the water is dirty.
Pre-Purchase Notices
- Water head indicates the height inside of a pipe, not the spraying height.
- Maximum flow rate is based on horizontal conditions in standard tests; actual flow varies depending on application and pipe diameter.
- The pumps are not self-priming and must be installed below the water level or fully submerged.
- Continuous running is supported when used correctly.
No reviews yet
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent